Is wire cutting faster or faster?

Is wire cutting faster or faster? wire cutting is one of the commonly used cutting processing methods, in which the wire speed and fast wire speed are the key factors affecting the processing efficiency and quality. So, in the wire cutting processing, fast wire or fast wire? This needs to be selected according to the specific processing needs and materials.

First, introduce the wire speed. wire speed refers to the speed at which the cutting line moves on the surface of the workpiece, and is an important indicator in wire cutting processing. The faster the wire speed, the shorter the time required, which can improve the processing efficiency. In the application, the speed of the wire speed and machining materials, wire diameter, machining surface roughness and other factors, in general, the wire speed is more suitable for rough surface processing, without affecting the processing quality of the premise of improving the processing efficiency.

The second is fast wire speed. Fast wire speed refers to the speed at which the cutting line passes through the workpiece at a high speed through the electrical insulating fluid. In this processing mode, the speed of the cutting line is very fast, which can reach 1000m/s. Due to the large electrical discharge energy, the phenomenon of line derailment and line break can be avoided when processing materials with higher hardness. In addition, the fast wire speed can also reduce the edge residue left by the processing, and the surface quality is higher than the wire speed, which is more suitable for processing with high surface requirements.

It should be noted that the application range of fast wire speed is relatively narrow, and careful selection should be made when processing different materials. In addition, although the fast wire speed is fast, it will consume a large number of processing electrodes and electrolytes, resulting in an increase in processing costs.

In summary, wire speed and fast wire speed are commonly used parameters in wire cutting processing. The fast wire speed is suitable for rough workpiece surface processing, and for processing with higher surface requirements, it is necessary to choose the appropriate fast wire speed. In practical applications, it is necessary to select the appropriate processing mode according to different processing materials and processing requirements, and adjust the processing parameters according to experience to achieve better processing results.

www.talentcnc.com
Suzhou Talent Import and Export Co., Ltd.